Maytag Washing Machine F3E1 error code
The pressure sensor that tells the control how much water is in the tub is sending a missing or out-of-range signal. Without a reliable water-level reading, the washer can't fill or drain correctly.
Also shown as: Pressure Sensor Fault
Last updated: September 30, 2026
What causes the F3E1 error?
- Pinched, kinked, or disconnected pressure hose
- Pressure hose leaking air or clogged with residue
- Failed pressure sensor on the control
- Control board fault
How to fix Maytag F3E1 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Power-cycle to clear a glitch
Unplug the washer for a few minutes, then restart a cycle and see if the code clears. - Check for siphoning or overfill
Make sure the drain hose isn't pushed too deep into the standpipe and the washer isn't visibly overfilling.
When to call a technician
- Code returns after a reset
- Washer overfills or won't fill at all
- You suspect the pressure hose or sensor needs testing
Frequently asked questions
What does the pressure sensor do?
It measures air pressure in a small hose connected to the tub to estimate the water level — the control uses that reading to decide when to stop filling and start washing.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Washing Machine error codes across brands · All Maytag codes →