Maytag Oven F6E1 error code
The wall oven detected a problem with the appliance manager control, the converter control, or the wiring connecting them. This is an internal electronics fault, not something caused by cooking.
Last updated: September 30, 2026
What causes the F6E1 error?
- Appliance manager control fault
- Converter control fault
- Wiring fault between control boards
How to fix Maytag F6E1 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Reset power at the breaker
Turn off the circuit breaker(s) for one full minute, then restore power and watch the display. - Verify oven operation
Check that the code doesn't return and the oven responds normally.
When to call a technician
- Code comes back after reset
- Oven display is frozen or blank
- Any sign of electrical damage
Frequently asked questions
Is F6E1 on an oven the same as F6E1 on a dishwasher?
No — Maytag reuses the F6E1 pattern across appliances, but on a wall oven it points to the appliance manager/converter controls, a different system from the dishwasher's user-interface fault.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.