Frigidaire Oven F10 error code
The control sensed a potential thermal runaway — the oven temperature climbing out of control beyond what was programmed. This is a safety fault, and the oven shuts down heating.
Last updated: September 30, 2026
What causes the F10 error?
- Failed oven temperature sensor (probe)
- Shorted relay on the control board
- Control board fault
How to fix Frigidaire F10 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Cut power immediately if overheating
If the oven is visibly overheating, turn it off and disconnect power at the breaker.Safety warning: An overheating oven is a fire risk — don't leave it unattended and don't use it until it's serviced. - Reset the range
With the oven cool, disconnect power for up to 30 seconds, then restore it and check whether the code returns.
When to call a technician
- Oven overheats again after reset
- Code appears during normal baking
- You smell burning — call for service before using the oven again
Frequently asked questions
Is F10 dangerous?
It can be — it means the oven may not be controlling its own temperature. Cut power and get it serviced rather than continuing to cook.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.