Frigidaire Oven F13 error code
The control detected an EEPROM failure — the chip that stores the oven's settings and calibration data isn't responding correctly. The range can't run reliably without it.
Last updated: September 30, 2026
Quick answer: Frigidaire oven error code F13: memory chip failure in the oven control. The most common cause is failed EEPROM on the control board. Try this first — reset the range. If the code persists, call a qualified technician. The full guide below walks through 1 fixes in order, with safety warnings.
What causes the F13 error?
- Failed EEPROM on the control board
- Power surge corrupting control memory
How to fix Frigidaire F13 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Reset the range
Disconnect power for up to 30 seconds by unplugging the unit or flipping the circuit breaker off and back on.
When to call a technician
Stop and call a qualified technician if any of these apply:
- Code returns after the reset — the control board likely needs replacement
Frequently asked questions
Can F13 be fixed without replacing parts?
Rarely — if a power reset doesn't clear it, the control board's memory chip has failed and the board needs replacing.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.