Maytag Oven F6E0 error code
The range's control system detected a problem with the oven control, the appliance manager board, or the wiring between them. The oven typically won't run until this is cleared.
Last updated: September 30, 2026
Quick answer: Maytag oven error code F6E0: oven control fault — reset power, then call for service. The most common cause is oven control board fault. Try this first — reset power at the breaker. If that does not clear it, monitor for the code.
What causes the F6E0 error?
- Oven control board fault
- Appliance manager board fault
- Loose or damaged wiring between boards
- Power surge
How to fix Maytag F6E0 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Reset power at the breaker
Turn off the circuit breaker(s) to the range for one full minute, then turn them back on.Safety warning: Use the breaker, not just the oven controls — the oven needs a full power cycle. - Monitor for the code
Watch the display for about a minute and verify normal oven operation.
When to call a technician
Stop and call a qualified technician if any of these apply:
- Code returns after the power reset
- Oven won't heat or respond
- You smell burning or see damage — don't use the oven
Frequently asked questions
Will resetting the breaker erase my settings?
It may reset the clock and any custom settings, but that's normal — the goal is to reboot the oven's control boards.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.