Kenmore Dryer PF error code
The dryer lost power partway through a cycle — a power failure occurred while it was running. This is usually a brief outage, a loose plug, or a tripped breaker rather than a broken part. Pressing Start resumes the cycle, or pressing Stop clears the display.
Last updated: September 30, 2026
What causes the PF error?
- Brief power outage or brownout in your home
- Loose dryer plug or damaged power cord
- Tripped house circuit breaker
- Repeated voltage dips on an overloaded circuit
How to fix Kenmore PF — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Resume or clear the code
Press Start to continue the cycle, or press Stop to clear the display. Check whether the load actually finished drying before restarting. - Check the power cord and outlet
Make sure the dryer plug is fully seated in the outlet. Inspect the cord for damage or heat discoloration, and reset the home circuit breaker if it tripped.Safety warning: If the cord or outlet shows burn marks or melting, leave it unplugged and call an electrician before using the dryer again.
When to call a technician
- PF appears every cycle even though your home power is fine
- The breaker trips repeatedly when the dryer runs
- You see damage on the cord, outlet, or terminal block
Frequently asked questions
Will a PF code damage my dryer?
A one-time PF is harmless. Repeated power interruptions are harder on the electronics, so it is worth finding the cause if it keeps happening.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.