Maytag Dishwasher F6E1 error code
The dishwasher's user interface and main control board aren't communicating properly. The panel may not respond to button presses, or cycles won't start or resume.
Last updated: September 30, 2026
What causes the F6E1 error?
- Loose wiring between the panel and main control
- Failed user interface board
- Failed main control board
- Power surge disrupting the controls
How to fix Maytag F6E1 — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Power-cycle the dishwasher
Disconnect power for 30 seconds, then restore it and check whether the panel responds.
When to call a technician
- Code returns after the power cycle
- Panel is dead or buttons don't respond
- Dishwasher won't start or resume cycles
Frequently asked questions
My dishwasher panel is flashing — is that F6E1?
Maytag dishwashers can signal this fault with a flashing light sequence; count the flashes (for example, 6 flashes, pause, 1 flash = F6E1) and check the code against your manual.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Dishwasher error codes across brands · All Maytag codes →