Kenmore Refrigerator F dH error code
The defrost system failed — the control found a fault in the defrost heater circuit, which can mean a bad defrost heater, a blown thermal fuse, or a failing control board. When defrost does not run, frost builds up on the evaporator coils until airflow and cooling suffer.
Also shown as: r dH, F dH, Er dH
Last updated: September 30, 2026
What causes the F dH error?
- Failed defrost heater element
- Blown defrost thermal fuse
- Failing main control board
- Damaged wiring in the defrost circuit
How to fix Kenmore F dH — step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Look for heavy frost buildup
Check the back wall of the freezer for thick frost or ice. Heavy buildup confirms the defrost system is not running. - Manually defrost once
Unplug the fridge and let it defrost with the doors open. This restores cooling temporarily but will not fix the underlying heater fault — treat it as a diagnostic step, not a repair.Safety warning: Store perishables in a cooler during the defrost.
When to call a technician
- Frost returns within days of a manual defrost
- You need to test the heater, fuse, or board — this requires panel removal and a meter
- The fridge stops cooling entirely
Frequently asked questions
What is the difference between F dH and r dH?
Both indicate a defrost heater circuit failure; the letter prefix just reflects which temperature display shows it. Troubleshoot them the same way.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Refrigerator error codes across brands · All Kenmore codes →